Share

​ ​ ​ ​ ​


Doger Technology Development, S.A.
0
  1. All Products
  2. 117 Series Pressure Switch (H117 Models 530-535 )

117 Series Pressure Switch (H117 Models 530-535 )

https://www.doger.com/web/image/product.template/10747/image_1920?unique=f990169

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Welded 316L stainless steel diaphragm and 1/2” NPT (female) pressure connection, large 0.72” orifice for clean-out purposes

$ 901.00 901.0 USD $ 901.00

1.00 USD

  • Pressure parameters .

This combination does not exist.

United Electric Controls
Pressure switches, temperature switches, thermocouples, RTDs, pressure and temperature transmitters, gas detection

The rugged, one piece enclosure features a slanted cover for wiring accessibility to the enclosed terminal block that is wired to either a SPDT or DPDT hermetically sealed microswitch. All welded, stainless steel pressure connections and sensors provide superior corrosion resistance – NACE compliant – and fire-safe protection within the harshest environments.

The 117 Series is an ideal choice for the most demanding applications; typically steel and aluminum mills, chemical and petrochemical plants, pulp and paper mills, wastewater treatment plants, midstream and downstream oil & gas, and pharmaceutical plants.

Parameters available in the datasheet of the documents section


Specifications for 117 Series Pressure Switch (H117 Models 530-535 )

Pressure parameters . 530 - Set Point Range: 300 Vac to 0 “wc /Deadband: 0.8 to 32 “wc /Over Range Pressure : 50 psi/ Proof Pressure: 100 psi or 531 - Set Point Range: 10 Vac to 10 “wc /Deadband: 0.4 to 2.4 “wc /Over Range Pressure : 50 psi/ Proof Pressure: 100 psi or 532 - Set Point Range: 50 Vac to 50 “wc /Deadband: 0.4 to 12 “wc /Over Range Pressure : 50 psi/ Proof Pressure: 100 psi or 533 - Set Point Range: 0.4 to 1.2 “wc /Deadband: 0.8 to 32 “wc /Over Range Pressure : 50 psi/ Proof Pressure: 100 psi or 534 - Set Point Range: 2.5 to 50 “wc /Deadband: 0.4 to 3.2 “wc /Over Range Pressure : 50 psi/ Proof Pressure: 100 psi or 535 - Set Point Range: 10 to 250 “wc /Deadband: 0.4 to 24 “wc /Over Range Pressure : 50 psi/ Proof Pressure: 100 psi
UEONLINE 117 Series Datasheet.pdf
Download
  • Approved for Division 2, Zone 2 hazardous locations
  • Optional ATEX or EAC intrinsic safety compliance for Zone 0
  •  Hermetically sealed snap switch, SPDT or DPDT output
  • Many models compliant to NACE MR0175
  • Optional sensor material for corrosive media
  • Ultra-low vacuum and pressure ranges
  • Polished stainless steel flush mount sensors


Product Image
117 Series Pressure Switch (H117 Models 530-535 )

$ 901.00 901.0 USD $ 901.00

1.00 USD